The effectiveness of the uv disinfection system depends largely on the intensity of the light; And the duration of exposure to contaminated water from ultraviolet light. In addition, you must be aware of the fact that this process may not remove microorganisms, as they may remain in the water; They only change their DNA because of ultraviolet light. Depending on the microbial species, they may be reactivated over time; Unless they are effectively removed.

 

    In addition, the effectiveness of this process may eventually decrease over time; The intensity of the light will also decrease because of prolonged use. Therefore, in order to ensure that the UV light intensity is still enough to inactivate microorganisms, maintenance is necessary. Remember, UV wavelengths range from 100 to 400 nm.

 

    If you want your uv disinfection system to work effectively, you must maintain a wavelength of no less than 350 nanometers. Therefore, you need to check your system from time to time to ensure that the system still provides safe and quality water for you and your family. When uv intensity is low, most systems use warning lights and automatic bypass systems. When do you need a service? Clean quartz tube.

 

    Keep in mind that 80 percent of most human diseases are caused by poor quality and polluted water. Therefore, you must be alert to the quality of drinking water. One of the many ways to make sure your drinking water is safe is to install water purifiers, such as uv disinfection systems, to disinfect tap water for safe drinking.