1, the surface spray processing industry: (cleaning attachments: oil, mechanical cutting, abrasive, dust removal of carbon deposit before plating, polishing wax), to remove oxide skin, remove polishing paste, oil removal derusting, ion cleaning, phosphating treatment before plating, metal surface activation treatment, etc. Stainless steel polishing products, stainless steel cutlery, cutlery, cutlery, locks, lighting, hand decoration before treatment, plating before cleaning.

    2. Machinery industry: (cleaning attachment: cutting oil, grinding grain, iron dust, dust, fingerprint)

    Removal of anti-rust grease; Cleaning of measuring tools; Oil removal and rust removal of mechanical parts; Engine, engine parts, gearbox, shock absorber, axle, oil nozzle, cylinder body, body, carburetor and car parts and chassis paint before oil, rust, phosphating before cleaning; Filter, piston accessories, filter cleaning and so on. Precision machinery parts, compressor spare parts, camera parts, bearings, hardware parts, mold, especially in the railway industry, in addition to oil decontamination of train air conditioning, car on the train parts rust, rust removal, oil removal of ultrasonic cleaning another consideration is cleaning a cleaning, cutting or placed on a tooling design. When the cleaning part is in the ultrasonic cleaning tank, no matter whether the cleaning part or the wash basket is not touching the bottom of the tank. The total cross-sectional area of the cleaning part should not exceed 70% of the cross-sectional area of the ultrasonic groove.

    Rubber and non-rigid plastics absorb the energy of the ultrasonic wave, so they should be used carefully when used in the work. Special attention should also be paid to the insulation. The design of the workbasket is improper, or the workpiece is too heavy, and the efficiency of the best ultrasonic cleaning system will be greatly reduced. Hooks, shelves, and beakers can be used to support cleaning. Very suitable.

    The measurement of the thickness of an object is measured by the pulse reflection in the medium. The heating wire is controlled by temperature. When the temperature increases, the cavitation is easy to occur, so the cleaning effect is better. Later, when the temperature continues to rise inside the cavity gas pressure increase, cause shock pressure drop, reflect the multiplication of two factors At present our country mainly adopts the piezoelectric transducer, because this kind of transducer acoustic conversion efficiency is high. The raw materials are cheap and easy to manufacture different structures to suit different cleaning requirements. There are many kinds of piezoelectric transducers, such as cylinders and horns.