How to add fabric to the wash - Industry News - Best Juice Machinery Factory,Buy Aseptic Filler Hot Sale,Juice Making Equipment Hot Sale,Juice Plant Machinery Discount Sale

News

Contact Us

Add : No. 58, Peng Qing Road, Guan ng Road subway station, Shanghai Metro Line 11

Chief Engineer :

Roy Li 0086-13310056505

Nancy Jing 0086-13310056506

May Feng 0086-13310056508

Website : www.sinojump.com

Email Address : customer@sinojump.com

Industry News

The front opening cylinder washing machine is connected to the power supply, and the door lock is locked by 0.5min electric lock to ensure the safety. If the fabric is added or removed during washing, the power of the washing machine should be disconnected first.

If the water level of the inner tube is lower than the bottom of the observation window, the machine can be used to add the fabric after the power failure is 2min.

4. What if the inner tube level is higher than the bottom of the observation window?

(1) turn the knob to the displacement position after the power switch is disconnected;

(2) after the power is connected, drain the water and drain the water level to the bottom of the observation window;

(3) re-adjust the washing procedure after power failure, and then add the fabric after 2min;

(4) close the door and turn on the power. The washing machine runs according to the new adjustment procedure.

It should be noted that to adjust the program during washing, you need to disconnect the power switch first, then turn the program knob clockwise to adjust the program. Continuously turn on the power to rotate the program knob, may damage the program controller.

5. Dehydration: the drainage pattern of the roller is to be drained and the maximum drainage height is 1 meter. This design is convenient for many families with no leakage.

Leave a message

pre： Selection of laundry procedures next： How to fix the washing machine

News

Contact Us

Leave a message

Get in touch

Products

Link

Fill in your information